SSM2143P Overview
It is packaged in an DIP-case that protects the operational amplifiers from damage. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.2mV for input offset voltage. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. Keeping the linear amplifier's supply voltage above 6V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. It is important that the op amp resistance stays within the range of 18kOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
SSM2143P Features
8 Pins
supply voltage of 15V
Resistance of 18kOhm
SSM2143P Applications
There are a lot of Analog Devices, Inc.
SSM2143P Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
