LTC6400CUD-14#TRPBF Overview
It is packaged in an QFN EP-case that protects the operational amplifiers from damage. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 3mV for input offset voltage. There should be no change in the voltage gain at 14.5dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. It is important to keep in mind that the power supply voltage of this electric component is below 3.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.85V is recommended. It is important that the op amp resistance stays within the range of 230Ohm.
LTC6400CUD-14#TRPBF Features
14.5dB voltage gain
Resistance of 230Ohm
LTC6400CUD-14#TRPBF Applications
There are a lot of Analog Devices, Inc.
LTC6400CUD-14#TRPBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
