LT6012IGN Overview
Packaged in a SSOP case, the buffer op amp is ready to use. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 60μV for this buffer op amp. As long as the supply current of the chip does not exceed 260μA, this op amp ic can operate. 126.02dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. As far as the device is concerned, buffer amplifier has 4 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The linear amplifier consists of 4 different elements in total. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 40V. A high supply voltage of more than 2.4V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts.
LT6012IGN Features
126.02dB voltage gain
LT6012IGN Applications
There are a lot of Analog Devices, Inc.
LT6012IGN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
