LT1800CS5#TRMPBF Overview
It is packaged in an TSOT-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape case. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 350μV for input offset voltage. A supply current of 1.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 98.59dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 1 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 12.6V, which is suitable. Keeping the linear amplifier's supply voltage above 2.3V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts. The linear amplifier has 1 amplifiers.
LT1800CS5#TRMPBF Features
98.59dB voltage gain
LT1800CS5#TRMPBF Applications
There are a lot of Analog Devices, Inc.
LT1800CS5#TRMPBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
