LT1175CN8 Overview
The Liner regulator IC is packaged in DIP case. Adjustable is the output type of the Voltage Regulator IC. This part implements 1 regulator ICs, which can be found in the following table. At present, it can produce an output of up to 500mA. It has 1 outputs to ensure that the performance of this regulator is prompt and sufficient. There is a dropout voltage of 10 volts on this IC regulator. Several pins on the chip are 8-shaped. When operating at maximum output current, the regulator IC reaches 500mA. It operates in the 65μA Quiescent Current state. You should use the regulator IC when the temperature is below 125°C. During the operation of the chip, the chip's operating temperature is not less than 0°C degrees. In order for it to operate, a supply current of 45μA must be applied. In general, this voltage regulator IC will output -19.3V volts when used as a system part.
LT1175CN8 Features
500mV dropout voltage
The maximum operating temperature of 0°C
LT1175CN8 Applications
There are a lot of Analog Devices, Inc. LT1175CN8 Linear Voltage Regulators applications.
- Car lighting
- Smart buildings
- Fans
- Smart manufacturing
- Vibration sensor
- Engine management
- CAV (Connected and Automated Vehicle)
- UPS (Uninterruptible Power Supply )
- Desktop microcomputer systems
- Ethernet condition monitoring vibration sensor
