LF398AN8#PBF Overview
It is packaged in an DIP-case that protects the operational amplifiers from damage. An op amp of this type is a SAMPLE AND HOLD CIRCUIT-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Sample and Hold Circuits op amp ic can be identified by the fact that this is a type of Sample and Hold Circuits device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1mV for input offset voltage. A supply current of 4.5mA can be used to operate this linear amplifier. This op amp ic has 1 circuits. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
LF398AN8#PBF Features
8 Pins
supply voltage of 15V
LF398AN8#PBF Applications
There are a lot of Analog Devices, Inc.
LF398AN8#PBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
