AD8569ARM-R2 Overview
In the package, you will find a MSOP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the BUFFER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 10 terminations. A total of 10 pins are located on this board. This linear amplifier should be powered by an 4.5V battery. This particular linear amplifier is a type of Buffer Amplifier device, to be precise. The op amp ic has an array of 10 pins on it. Op amp rates 10mV as input offset voltage. You should keep the voltage gain at 0dB for the time being. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 4 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage.
AD8569ARM-R2 Features
10 Pins
supply voltage of 4.5V
0dB voltage gain
AD8569ARM-R2 Applications
There are a lot of Analog Devices, Inc.
AD8569ARM-R2 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
