AD811SCHIPS Overview
A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. A total of 5 terminations have been reported in the past few weeks. It consists of a total of 0 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 0 pins are present on the instrumentation amplifier. Op amp rates 3mV as input offset voltage. A supply current of 16mA can be used to operate this linear amplifier. The temperature should not be lower than -55°C for operational amplifier ics to operate. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. The quiescent current is 16mA.
AD811SCHIPS Features
0 Pins
supply voltage of 15V
AD811SCHIPS Applications
There are a lot of Analog Devices, Inc. AD811SCHIPS Instrumentational OP Amps applications.
- Micro signal measurement
- Instrumentation
- Voltage regulation circuit
- Biopotential
- Laptop
- Fission chambers
- Signal amplification
- Digital cameras
- Strain gauges
- Broadcasting
