V62/12617-01XB Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -55°C~125°C. A total of 16 terminations have been recorded. Electronic part bodies are injected with 16 pins. Multiplexers built on a SPST switching circuit are built. Search with ADG1212 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 190Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIt is recommended that you attach at least 4.5V to your dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. The electronic component can function from 12V. There are 4 inputs to be operated.
V62/12617-01XB Features
Switch Circuit: SPST
V62/12617-01XB Applications
There are a lot of Analog Devices Inc. V62/12617-01XB Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- E1 Multiplexer
- ATM
- Video switching
- Remote Powered Equipment
- Medical
- Low-Voltage
- High-Voltage
- Medical systems
- Cell phones
