SMP04EPZ Overview
The linear amplifier is packaged in a 16-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 16 terminations in the next few months. A total of 16 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. 16 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 4mA . On this instrumentation amplifier, there are 4 circuits that are connected together. 4 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 12V.
SMP04EPZ Features
16 Pins
supply voltage of 5V
SMP04EPZ Applications
There are a lot of Analog Devices Inc. SMP04EPZ Instrumentational OP Amps applications.
- Professional videography
- Inverse/same-phase proportional circuit
- Portable media players
- Measurements of Wheatstone bridge
- Multiplication circuits
- Commercial audio systems
- Scintillation detectors
- Automotive sensors
- Automatic control
- Integrator circuits
