OP491GRUZ-REEL Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 14 terminations have been reported in the past few weeks. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are available on the instrumentation amplifier. Op amp ic rates 700μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 260μA . There should be no change in the voltage gain at 96.9dB. As far as the device is concerned, buffer amplifier has 4 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 9V. TAPE AND REEL is adopted to pack the instrumentation amplifier. As a result, linear amplifier's quiescent current is 200μA.
OP491GRUZ-REEL Features
14 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
OP491GRUZ-REEL Applications
There are a lot of Analog Devices Inc. OP491GRUZ-REEL Instrumentational OP Amps applications.
- Blood pressure sensors
- Proportional operation circuits
- Thermocouples
- Information processing
- Video computer boards
- Voltage regulation circuit
- Comparator
- Strain gauges
- Logarithmic operation circuits
- Weighing systems
