OP297FSZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 1.25mA . There should be no change in the voltage gain at 130.1dB. There are a total of 2 channels available on the op amps. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 625μA quiescent current in linear amplifier.
OP297FSZ-REEL7 Features
8 Pins
supply voltage of 15V
130.1dB voltage gain
OP297FSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP297FSZ-REEL7 Instrumentational OP Amps applications.
- Blood pressure sensors
- Professional videography
- Band-pass filter
- Inverse/same-phase proportional circuit
- Vehicle electronics
- Car stereo
- Thermocouples
- Signal filtering
- Weighing systems
- Power control
