OP281GRUZ-REEL Overview
The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 3.3μA . Keeping the voltage gain at 83.52dB is the best course of action. As far as the device is concerned, buffer amplifier has 2 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 5μA.
OP281GRUZ-REEL Features
8 Pins
supply voltage of 5V
83.52dB voltage gain
Output Type: Rail-to-Rail
OP281GRUZ-REEL Applications
There are a lot of Analog Devices Inc. OP281GRUZ-REEL Instrumentational OP Amps applications.
- Exponential operation circuits
- Test equipment
- Fast A/D and D/A converters
- Tablets
- Weak signal detection
- Radar
- Biopotential
- Computer workstations
- Inverse/same-phase proportional circuit
- Wireless base stations
