Name: ADSP-BF592BCPZ
Brand: Hotenda
SKU: ADSP-BF592BCPZ
Price: 12.93000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	64-VFQFN Exposed Pad, CSP
Number of Pins	64
Operating Temperature	-40°C~85°C TA
Packaging	Tray
Series	Blackfin®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	64
Type	Fixed Point
Subcategory	Microprocessors
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.4V
Terminal Pitch	0.5mm
Frequency	400MHz
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADSP-BF592
Pin Count	64
Interface	I2C, I2S, IrDA, PPI, SPI, SPORT, UART
Max Supply Voltage	1.47V
Min Supply Voltage	1.33V
Memory Size	68kB
Number of I/O	32
RAM Size	32kB
Memory Type	EEPROM, FLASH
Number of Bits	16
Bit Size	32
Data Bus Width	32b
Number of Timers/Counters	4
Core Architecture	Blackfin
Boundary Scan	YES
Low Power Mode	YES
Voltage - I/O	1.8V 2.5V 3.3V
Number of UART Channels	1
Barrel Shifter	YES
Internal Bus Architecture	MULTIPLE
Non-Volatile Memory	ROM (64kB)
Voltage - Core	1.29V
On Chip Data RAM	64kB
Number of SPI Channels	2
Height	950μm
Length	9mm
Width	9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADSP-BF592BCPZ Product Details

ADSP-BF592BCPZ Overview

It is a type of electronic component available in package 64-VFQFN Exposed Pad, CSP.Packaging way Tray is provided.With its association with Fixed Point, it is suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.As the name implies, the analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be inserted or removed.The Blackfin? series incorporates this digital signal processor.In order to use it, it has 64 terminations.This device is powered by 1.4V's supply voltage.Pins are available on the 64 component.In its configuration, it contains 64 pins.It is possible to identify numerous related parts using the base part number ADSP-BF592.In order for the device to operate at the frequency of 400MHz, it has been designed specifically.Surface Mount is used as the mounting method.This device can be classified into the subcategory Microprocessors based on its specific characteristics.Devices like this can be powered with as little as 1.33V volts.This device can be powered by 1.47V voltages.Its memory is capable of storing 68kB data.1 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.External events are tracked and measured with 4 timers/counters.Processor core Blackfin adopts the Blackfin architecture.32 I/Os are present on the device.The memory type it uses is EEPROM, FLASH.There are 16 information stored in the device.2 SPI channels are used for short-distance communication in this embedded system.