ADP5301ACBZ-3-R7 Overview
Using the Cut Tape (CT) package, this voltage regulator optimizes the performance of the voltage regulator 12v. This harley voltage regulator has 9 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. The space-saving 9-WFBGA, WLCSP package is available for this voltage regulator. There are 1 outputs on DC DC switching regulator. The adjusting voltage regulator generates Programmable output. There is a switching regulator that is compatible with the Surface Mount mounting. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. The switching frequency of this DC-DC switching regulator reaches 2MHz. Despite its low input voltage, this voltage regulator can operate. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. Featuring a maximum design flexibility of 50mA 500mA, dc to dc voltage regulator has a maximum output current of 50mA 500mA. Its 260 peak reflow temperature makes this regulator essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. This DC/DC regulator belongs to the ADP5301 family. A voltage of 5V volts can be produced by voltage regulator. The switching regulator operation is carried out by 9 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. A maximum voltage of 5V can be obtained from the regulator voltage. With 6.5V as the supply voltage, this DC-DC switching regulator will operate.
ADP5301ACBZ-3-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
9 pins
Operating supply voltage of 6.5V
ADP5301ACBZ-3-R7 Applications
There are a lot of Analog Devices Inc. ADP5301ACBZ-3-R7 Voltage Regulators applications.
- Imported equipment
- Various precision measuring instruments
- Network technology
- Pipe bending machines
- Driver circuits
- Balance equipment
- Electrical power transmission
- PSRR circuits
- Machining centers
- Special machining machine tools
