ADP5051ACPZ-R7 Overview
It comes in the 48-WFQFN Exposed Pad, CSP package, which makes switching controller suitable for most applications. For 4 outputs, the dc motor controller is appropriate. Cut Tape (CT) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~15V. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 250kHz~1.4MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Watchdog. Switch converters are connected to ICs with POWER SUPPLY MANAGEMENT CIRCUIT analog outputs. Terminal (s) of the switching converters are designed at the QUAD position. 48 terminations with a variety of function. Other relevant dc to dc converter ics can be found by searching "ADP5051". Pins number 48 of switching converter in total. Specifically, switching converter falls under the Power Management Circuits category. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC to DC voltage regulator has the value of THRESHOLD VOLTAGE IS 0.5V to better satisfy the requirement. In order to ensure the dc switcher's functionality, users must limit the voltage to 15V due to the dc switcher's maximum input voltage. The supply voltage must be 12V. Switching controller is necessary to have a supply voltage of 4.5V. An output current greater than 4kA cannot be provided by the dc switcher. Current supplied to the controller should not exceed 6.35mA. A datasheet states that the switching converter can output 13.5V volts at its maximum. There is 800mV voltage output lower than 800mV on the voltage controller. Communication with high quality requires 5 channels.
ADP5051ACPZ-R7 Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1.4MHz
Enable, Frequency Control, Power Good, Soft Start, Watchdog
Max Duty Cycle: 50 %
THRESHOLD VOLTAGE IS 0.5V
ADP5051ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP5051ACPZ-R7 DC to DC converter applications.
- Electric heating, lighting
- Shearing machines
- Injection molding machinery
- Current source circuits
- Game consoles
- Ball screw pair
- Sensitive electronic devices
- Cutting machine tools
- Balance equipment
- Bending machines
