ADP1883ARMZ-1.0-R7 Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 3V~20V. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at 1MHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable. Search for "ADP1883" to find other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 17V. You should note that the dc dc regulator's usual output current is 25A. It is set to 45 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Ideally, dc regulator should be kept at a temperature of -40°C or higher. The temperature should not exceed 125°C degrees Celsius. The dc switcher's maximum input voltage is 5.5V, so users must limit the voltage accordingly. The supplier dc dc controller package for this part would be 10-MSOP. A voltage of 2.75V is required for the supply. There will be 25A output current greater than 25A from the dc switcher. Datasheets indicate that the switching converter can output 4.67V volts at its maximum. The supply current is 140μA. There is 800mV voltage output lower than 800mV on the voltage controller. There are 1 phases in this controller. In terms of maximum supply voltage, switching voltage regulators is rated 20V. This the controllers dc has a nominal current supply of 70mA.
ADP1883ARMZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
Max Duty Cycle: 45 %
ADP1883ARMZ-1.0-R7 Applications
There are a lot of Analog Devices Inc.
ADP1883ARMZ-1.0-R7 DC to DC converter applications.
- Servo drive system
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
