ADP1882ARMZ-0.6-R7 Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 2.75V~20V. Suitable for work in a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 600kHz position. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. The 10 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "ADP1882". There are 10 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, the DC regulator outputs 17V voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. A duty cycle set at 65 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. To better satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE 0.8V. The dc switcher's maximum input voltage is 5.5V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 2.75V. There will be 25A current output from the dc switcher above 25A. At its maximum output, the switching converter can provide 4.67V volts. There is a 140μA volt supply current. At its lowest voltage, the voltage controller does not produce less than 800mV. Switching voltage regulators' nominal current supply is 70mA.
ADP1882ARMZ-0.6-R7 Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
MINIMUM OUTPUT VOLTAGE 0.8V
ADP1882ARMZ-0.6-R7 Applications
There are a lot of Analog Devices Inc. ADP1882ARMZ-0.6-R7 DC to DC converter applications.
- Network technology
- Geothermal power
- Automatic plug-in machines
- Photovoltaic power
- Laboratories
- Textile machinery
- Machining centers
- ATMs
- Low output voltage switching power supply circuits
- Scientific research
