ADP1870ACPZ-1.0-R7 Overview
In the 10-VFDFN Exposed Pad, CSP package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 3.25V~20V voltage are supplied and operated. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 1MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 10 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics can be found by searching "ADP1870". Total pins of switching converter are 10. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 600mV voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 25A when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 45 % on power-up or power-down to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. The value of DC to DC voltage regulator is set to MINIMUM OUTPUT VOLTAGE: 0.6V in order to better satisfy the requirement. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The dc switcher's maximum input voltage is 20V; users must limit it accordingly. 2.95V is the required supply voltage. At its maximum, the switching converter can output 18V volts. There is a 140μA volt supply current. voltage controllers with a minimum voltage output of 600mV cannot operate. The nominal current supply of this the controllers dc is 1.1mA.
ADP1870ACPZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
MINIMUM OUTPUT VOLTAGE: 0.6V
ADP1870ACPZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1870ACPZ-1.0-R7 DC to DC converter applications.
- Boring machines
- Flaw detection equipment
- Adjustable voltage or current linear circuits
- USB circuits
- Textile machinery
- Various CNC machine tools
- Low output voltage switching power supply circuits
- Combined machine tools
- Terrestrial set-top boxes
- Ball screw pair
