ADP1190AACBZ-R7 Overview
Tape & Reel (TR) is the way it's packaged.The 12-UFBGA, WLCSP package includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.There are 5 (4 Signal) outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of P-Channel volts.The lighting driver has Load Discharge features.It is part of the ADP1190 family of LED drivers.In order to operate, the 12 pins are used.Maximum output current falls to 1A when operation criteria are met.Surface Mount is mounted in the way of this LED driving board.There are 12 pins in total on this board.There is 65mOhm resistance on the LED driver.In this case, a digital IC is used, which is SPST.In total, there are 1 channels available.Optimal efficiency requires a voltage of 1.8V.Its maximum input voltage is 3.6V volts.A minimum input voltage of 1.4V volts is required for this LED driver.
ADP1190AACBZ-R7 Features
Resistance of 65mOhm
1 channels
ADP1190AACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP1190AACBZ-R7 Power Switches ICs applications.
- Solid State Drivers
- Hot Swaps
- Hot Swap
- USB Power Distribution
- Hard Disk Drives
- Portable GPS Device
- Portable Devices
- Low Voltage I/O System Power
- Wireless Headsets
- Various applications equipped with buttons
