ADM8641T263ACBZ-R7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. A Cut Tape (CT) package is used to package the power management. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 6-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Voltage Detector products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2V volt supply. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. 6 pins are present in total in this power management. Power managment ic pin count is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 900mV volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. To find similar IC managements from the manufacturer, you can always search by ADM8641.
ADM8641T263ACBZ-R7 Features
Voltage Detector type
Minimum supply voltage of 900mV
ADM8641T263ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADM8641T263ACBZ-R7 Voltage Supervisors applications.
- Important electronics for automotive protection
- Precision measurement
- Digitally controlled LDO regulators circuit
- Power distribution systems of ICU
- Data storage applications
- Military communications
- Analog circuit
- Detection of phase sequence
- Military electronics
- WiFi router
