ADM8616TCYAKSZ-RL7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a SC-82A, SOT-343 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.6V. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. 4 pins are present in total in this power management. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 20μA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. You can always use ADM8616, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 20μA.
ADM8616TCYAKSZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current
ADM8616TCYAKSZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM8616TCYAKSZ-RL7 Voltage Supervisors applications.
- Multi-voltage system
- Unattended substation automation
- Leakage protection
- Electronics installed in the vehicle
- Automotive permanent magnet synchronous motors
- Urban rail transit weak current power monitoring
- Functional modules
- Battery-powered equipment
- Analog circuit
- Low voltage/high power - AI, GPU
