ADM823ZYKSZ-R7 Overview
There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.38V volt supply. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 24μA for the power management. A similar IC managements number of the manufacturer can always be found by using ADM823, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 12μA. There are a total of 1 monitored inputs on the power management.
ADM823ZYKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823ZYKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823ZYKSZ-R7 Voltage Supervisors applications.
- Telecommunications equipment
- Medical-specific isolation transformer
- Microcontroller system
- Important electronics for automotive protection
- Battery cars
- Military electronics
- Power distribution systems of operating room
- Smart meter
- Digitally controlled LDO regulators circuit
- Detection of phase loss
