ADM812SART-REEL7 Overview
A total of 4 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 240. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 4 pins on the board. This power management has 4 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a 15μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by ADM812. This power management requires 3.3V power to work. A maximum supply temperature of 10μA can be used. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM812SART-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM812SART-REEL7 Applications
There are a lot of Analog Devices Inc. ADM812SART-REEL7 Voltage Supervisors applications.
- Consumer electronics
- Sensitive sensors
- Utility meter
- Telecommunications equipment
- Satellite navigation
- Unattended substation automation
- FPGA design
- Low voltage/high power - AI, GPU
- Personal computers
- Digitally controlled LDO regulators circuit
