Name: ADM811-3TARTZ-RL
Brand: Hotenda
SKU: ADM811-3TARTZ-RL
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-253-4, TO-253AA
Number of Pins	4
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	4
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	200mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADM811
Output	Push-Pull, Totem Pole
Pin Count	4
Power Supplies	3.3V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	15μA
Nominal Supply Current	10μA
Power Dissipation	200mW
Max Supply Current	10μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	3.08V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	3.03V
Max Reset Threshold Voltage	3.14V
Threshold Voltage	+3.08V
Undervoltage Threshold	3.03V
Overvoltage Threshold	3.14V
Number of Monitored Inputs	1
Reset Delay Time	700 ms
Length	2.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADM811-3TARTZ-RL Product Details

ADM811-3TARTZ-RL Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3.3V is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 4 pins that are attached to IC management. This power management has 4 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using ADM811, the base power ics number. There is a requirement for 3.3V power to power this power management. At the most, voltage supervisor can work with a supply temperature of 10μA. On the power management, there are a total of 1 inputs that are monitored.