ADM810ZAKSZ-REEL7 Overview
There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a SC-70, SOT-323 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 2.5V volt supply. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 3 pins on power management. This power management system has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 60μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using ADM810, the base power ics number. To operate this power management, you will need at least 2.5V volts of power. The maximum supply temperature voltage supervisor can handle is 60μA. There are 1 inputs monitored at once on the power management.
ADM810ZAKSZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM810ZAKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM810ZAKSZ-REEL7 Voltage Supervisors applications.
- Refrigeration
- Radar
- Low voltage/high power - AI, GPU
- Medical-specific isolation transformer
- Analog circuit
- Military electronics
- Electrical fire monitoring system
- Fire equipment power monitoring system
- Unattended substation automation
- Telecommunications equipment
