Name: ADM809LAKS-REEL
Brand: Hotenda
SKU: ADM809LAKS-REEL
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-70, SOT-323
Number of Pins	70
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	3
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Power Management Circuits
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM809
Output	Push-Pull, Totem Pole
Pin Count	3
JESD-30 Code	R-PDSO-G3
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	60μA
Nominal Supply Current	60μA
Max Supply Current	60μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.63V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.56V
Max Reset Threshold Voltage	4.7V
Threshold Voltage	+4.63V
Undervoltage Threshold	4.56V
Overvoltage Threshold	4.7V
Number of Monitored Inputs	1
Reset Delay Time	840 ms
Length	2mm
RoHS Status	Non-RoHS Compliant

ADM809LAKS-REEL Product Details

ADM809LAKS-REEL Overview

It is mounted through 3 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. IC management conducts at a voltage of 5V. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. There are 70 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 60μA. You can always use ADM809, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 60μA can be used with this power management. It is possible to monitor 1 inputs at the same time on the power management as a whole.