Name: ADM809-5SAKS-REEL
Brand: Hotenda
SKU: ADM809-5SAKS-REEL
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-70, SOT-323
Number of Pins	3
Operating Temperature	-40°C~150°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	3
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM809
Output	Push-Pull, Totem Pole
Pin Count	3
Operating Supply Voltage	3.3V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	60μA
Nominal Supply Current	50μA
Max Supply Current	50μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.93V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	2.78V
Max Reset Threshold Voltage	3.08V
Threshold Voltage	+2.93V
Undervoltage Threshold	2.78V
Overvoltage Threshold	3.08V
Number of Monitored Inputs	1
Reset Delay Time	80 ms
Length	2mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM809-5SAKS-REEL Product Details

ADM809-5SAKS-REEL Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-70, SOT-323 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 240. When 3.3V is applied to the power ic, it conducts. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 3 pins. This power management has 3 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~150°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 60μA is the recommended value. You can always use ADM809, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 50μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.