Name: ADM708AN
Brand: Hotenda
SKU: ADM708AN
Price: 1.56000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	ADM708
Output	Push-Pull, Push-Pull
Pin Count	8
Power Supplies	5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	250μA
Nominal Supply Current	250μA
Power Dissipation	727mW
Max Supply Current	250μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	4.4V
Reset Timeout	160ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.5V
Threshold Voltage	+4.4V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.5V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Height Seated (Max)	5.33mm
Length	9.27mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM708AN Product Details

ADM708AN Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. A Tube package is used to package the power management. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 2 channels. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management conducts in a 5V-voltage supply. Power management is included in the Through Hole mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Through Hole mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Push-Pull. It is estimated that the voltage supervisor's supply current is 250μA. You can always use ADM708, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 250μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.