ADM706SAN Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. A Tube package is used to package the power management. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. 8 pins are present in total in this power management. The pins of the power management system count 8. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Through HoleThe supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management's supply current is 250μA. It is always advisable to use ADM706, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 350μA. On the power management, 1 inputs are monitored.
ADM706SAN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM706SAN Applications
There are a lot of Analog Devices Inc. ADM706SAN Voltage Supervisors applications.
- DVR
- Fire equipment power monitoring system
- FPGA design
- Analog circuit
- Smartphones
- Sensitive sensors
- Battery cars
- Insulation fault location system
- Power distribution systems of operating room
- DSP
