Name: ADM697AR
Brand: Hotenda
SKU: ADM697AR
Price: 4.31000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Battery Backup Circuit
Subcategory	Power Management Circuits
Max Power Dissipation	600mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM697
Output	Push-Pull, Push-Pull
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	3.3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	3V
Operating Supply Current	1.95mA
Nominal Supply Current	1.95mA
Power Dissipation	600mW
Max Supply Current	1.95mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	1.3V
Reset Timeout	35ms Minimum
Number of Monitored Inputs	1
Reset Delay Time	70 ms
Height Seated (Max)	2.65mm
Width	7.5mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM697AR Product Details

ADM697AR Overview

It is mounted through 16 terminals on the power management. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 16-SOIC (0.295, 7.50mm Width) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. During the reflow process, a peak temperature of 240 is specified for the package. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 16 pins on power management. There are 16 pins on the power managment ic. It is recommended that Vsup should not be less than 3V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. Supplied with a operating current of 1.95mA, this PMIC is capable of fully function as specified. It is always advisable to use ADM697, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3.3/5V volts of power. A maximum supply temperature of 1.95mA can be used with this power management. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.