Name: ADM697AN
Brand: Hotenda
SKU: ADM697AN
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Battery Backup Circuit
Subcategory	Power Management Circuits
Max Power Dissipation	600mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	ADM697
Output	Push-Pull, Push-Pull
Pin Count	16
Power Supplies	3.3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	3V
Operating Supply Current	1.95mA
Nominal Supply Current	1.95mA
Power Dissipation	600mW
Max Supply Current	1.95mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	1.3V
Reset Timeout	35ms Minimum
Number of Monitored Inputs	1
Reset Delay Time	70 ms
Height Seated (Max)	5.33mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM697AN Product Details

ADM697AN Overview

This power management consists of 16 mounting terminals on which it can be mounted. There is a Tube-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. During operation, the power ic is supplied with a voltage of 5V. Using Through Hole, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 16 pins on the board. The pins of the power management system count 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. Supplied with a operating current of 1.95mA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using ADM697, the base power ics number. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 1.95mA at the most. There are a total of 1 monitored inputs on the power management.