Name: ADM693AARN
Brand: Hotenda
SKU: ADM693AARN
Price: 2.94000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Battery Backup Circuit
Subcategory	Power Management Circuits
Max Power Dissipation	700mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	4.5V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM693
Output	Open Drain, Push-Pull
Pin Count	16
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	0V
Operating Supply Current	100μA
Nominal Supply Current	100μA
Power Dissipation	700mW
Max Supply Current	100μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	4.4V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.5V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.5V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Length	9.9mm
Width	4.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM693AARN Product Details

ADM693AARN Overview

This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 16-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 240 for the package during reflow. There is a voltage supply of 4.5V for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 16 pins. This power management system has 16 pins. It is recommended that Vsup should not be less than 0V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. The power management's supply current is 100μA. It is always advisable to use ADM693, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power. A maximum supply temperature of 100μA can be used with this power management. There are a total of 1 monitored inputs on the power management.