Name: ADM690AARM
Brand: Hotenda
SKU: ADM690AARM
Price: 2.18000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Power Management Circuits
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM690
Output	Push-Pull, Totem Pole
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	5V
Number of Channels	3
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	100μA
Nominal Supply Current	100μA
Power Dissipation	500mW
Max Supply Current	100μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.65V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Length	3mm
Width	3mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM690AARM Product Details

ADM690AARM Overview

A total of 8 terminals are used to mount this power management. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 3 channels, each of which can be used independently. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 240. During operation, the power ic is supplied with a voltage of 5V. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. This power management system has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 100μA. It is always advisable to use ADM690, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 100μA. There are 1 inputs monitored at once on the power management.