ADM6346-43ARTZ-R7 Overview
It is mounted through 3 terminals on the power management. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. It has a total of 3 pins that are attached to IC management. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 500nA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using ADM6346, the base power ics number. The power management monitors 1 inputs at once.
ADM6346-43ARTZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
500nA operating supply current
ADM6346-43ARTZ-R7 Applications
There are a lot of Analog Devices Inc. ADM6346-43ARTZ-R7 Voltage Supervisors applications.
- Solar power charger
- FPGA design
- Power communication system
- Smartphones
- Set top box
- Urban rail transit weak current power monitoring
- Sensitive sensors
- Battery cars
- Power distribution systems of infant care room
- Electric heating appliances
