Name: ADM5170AP
Brand: Hotenda
SKU: ADM5170AP
Price: 5.02000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Driver
Additional Feature	PROGRAMMABLE SLEW RATE
Technology	CMOS
Voltage - Supply	9V~15V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	10V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM5170
Pin Count	28
Operating Supply Voltage	10V
Operating Supply Current	36mA
Nominal Supply Current	36mA
Max Supply Current	36mA
Logic Function	Transceiver
Data Rate	116Kbps
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232, RS423
Input Characteristics	STANDARD
Max Dual Supply Voltage	15V
Number of Drivers/Receivers	8/0
Min Dual Supply Voltage	9V
Dual Supply Voltage	12V
Interface Standard	EIA-232-E; V.10; X.26; EIA-423-A
Number of Drivers	8
ESD Protection	No
Negative Supply Voltage-Nom	-10V
Transmit Delay-Max	15 ns
Out Swing-Min	9 V
High Level Input Current-Max	0.000001A
Height Seated (Max)	4.57mm
Length	11.505mm
Width	11.505mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM5170AP Product Details

ADM5170AP Overview

This driver chip is excellent for driving common LEDs due to its enhanced 28-LCC (J-Lead) package.In this package, the receiver is mounted in the Tube format.The Driver can transceiver type enables this part to be used in a wide range of applications.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A power supply of 9V~15V is used by this differential driver.As many as 8/0 receivers/drivers are eligible for use on this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An output voltage range of 10V is sufficient to run this line driver ic efficiently.Wide receiver has 28 terminations built in for driving or receiving signals from data.In this package, you will find 28 market-standard pinouts for this transceiver.ADM5170 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 28-pin driver IC.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a 10V input voltage supply that can be used to operate this transceiver module.On the integrator circuit, there are 8 drivers embedded.A PROGRAMMABLE SLEW RATE function is also included in this optical transceiver module, which improves stability and accuracy of signal management.It has the ability to drive LEDs with an input voltage of up to about 36mA with the help of this integrating circuit.A can transceiver that has a current input of 36mA or greater may be affected by malfunctions.Ideally, the operating temperature of line driver ic should be kept at or above -10V.As part of the design, this line driver integrator circuit has a dual supply voltage arrangement with a maximum of 15V.If this can transceiver has a dual supply voltage, you should select a power supply that is suitable for 9V outputs.