Name: ADM3070EARZ-REEL7
Brand: Hotenda
SKU: ADM3070EARZ-REEL7
Price: 5.62000 USD
Availability: InStock

new-10%

ADM3070EARZ-REEL7

Manufacturer part number:ADM3070EARZ-REEL7

Manufacturer:Hotenda

Description:14 TerminationsADM3070 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Case Package:SOT-23

Datasheet:ADM3070EARZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Additional Feature	DATA RATES UPTO 250 KBPS; LOW POWER SHUTDOWN
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM3070
Pin Count	14
JESD-30 Code	R-PDSO-G14
Qualification Status	Not Qualified
Power Supplies	3.3V
Supply Current-Max	1.5mA
Data Rate	250kbps
Differential Output	YES
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	100mV
Interface Standard	EIA-422; EIA-485
Receive Delay-Max	200 ns
Transmit Delay-Max	1500 ns
Output Low Current-Max	0.001A
Out Swing-Min	1.5 V
Height Seated (Max)	1.75mm
Length	8.65mm
Width	3.9mm
RoHS Status	ROHS3 Compliant

ADM3070EARZ-REEL7 Product Details

ADM3070EARZ-REEL7 Overview

Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tape & Reel (TR).The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 3V~3.6V of power.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.This wide receiver has 14 terminations for driving and receiving data signals.It is packaged with 14 pinouts that are market standard for this particular transceiver.This part number ADM3070 can be used to search for more variants based on the product type, temperature, package, etc.It was possible to achieve a 1-bit resolution through this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.Line Driver or Receivers is a subcategory of this rf transceiver module.It is designed so that it can be operated from a 3.3V power supply with this driver IC.ICs with DATA RATES UPTO 250 KBPS; LOW POWER SHUTDOWN functions also improve the overall stability and accuracy of signal management.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 1.5mA.