ADM1817-R22AKSZ-R7 Overview
Power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-70, SOT-323 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Surface Mount is the one that mounts power management. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 16μA supply current present in the power management. You can always use ADM1817, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM1817-R22AKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1817-R22AKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM1817-R22AKSZ-R7 Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Dash board
- Utility meter
- Power distribution systems of ICU
- Power communication system
- Battery cars
- Leakage current detection
- Automotive power systems
- Multi-voltage system
- Consumer electronics
