ADM1816-R23AKSZ-R7 Overview
As you can see, this power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Using Surface Mount, IC management is mounted. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 16μA is the recommended value. It is always advisable to use ADM1816, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 16μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM1816-R23AKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1816-R23AKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM1816-R23AKSZ-R7 Voltage Supervisors applications.
- Network equipment
- Leakage protection
- Low voltage/high power - AI, GPU
- Transformer load monitoring equipment
- Satellite navigation
- Microprocessor system
- Analog circuit
- Multi-voltage system
- Kitchen appliances
- Important electronics for automotive protection
