ADM1810-5ARTZ-RL7 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 5V volt supply. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. Pin count of the power management is 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 16μA. A similar IC managements number of the manufacturer can always be found by using ADM1810, the base power ics number. A maximum supply temperature of 16μA can be used. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM1810-5ARTZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1810-5ARTZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM1810-5ARTZ-RL7 Voltage Supervisors applications.
- Multi-voltage system
- Radar
- Satellite navigation
- WiFi router
- DSP
- Power distribution systems of ICU
- Data storage applications
- Network equipment
- DVR
- Refrigeration
