Name: ADM1810-5AKS-RL7
Brand: Hotenda
SKU: ADM1810-5AKS-RL7
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-70, SOT-323
Number of Pins	70
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	3
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	ADM1810
Output	Push-Pull, Totem Pole
Pin Count	3
JESD-30 Code	R-PDSO-G3
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	16μA
Nominal Supply Current	16μA
Max Supply Current	16μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.62V
Reset Timeout	100ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Threshold Voltage	+4.62V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Number of Monitored Inputs	1
Reset Delay Time	250 ms
Length	2mm
RoHS Status	Non-RoHS Compliant

ADM1810-5AKS-RL7 Product Details

ADM1810-5AKS-RL7 Overview

Power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 225. The supervisor is always powered by a 5V volt supply. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 3 pins in it. Pin count of the power management is 70. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 16μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to ADM1810, the base PMIC number. A maximum supply temperature of 16μA can be used with this power management. The power management has 1 monitored inputs.