ADM1088AKS-REEL7 Overview
This power management consists of 6 mounting terminals on which it can be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached 6-TSSOP, SC-88, SOT-363 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Sequencer products. Packages are specified to have an average peak reflow temperature of 240. Manage ics operate at 3.3V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. 6 pins are present in total in this power management. 6 pins are on the supervisor. IC management can only work with a supply voltage of 2.25V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 3.6V volts. In this case, Surface Mount is the recommended mounting type. Power management has an output of Push-Pull, Totem Pole during operation. You can always use ADM1088, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 2.5/3.3V volts of power. The power management can work with a maximum supply temperature of 15μA.
ADM1088AKS-REEL7 Features
Sequencer type
Minimum supply voltage of 2.25V
ADM1088AKS-REEL7 Applications
There are a lot of Analog Devices Inc. ADM1088AKS-REEL7 Voltage Supervisors applications.
- Network equipment
- Electric heating appliances
- Power distribution systems of ICU
- Rechargeable batteries
- Electronics installed in the vehicle
- Power distribution systems of CCU
- Stable power system
- Detection of phase imbalance
- Refrigeration
- Insulation fault location system
