Name: ADG787BCPZ-500RL7
Brand: Hotenda
SKU: ADG787BCPZ-500RL7
Price: 3.12000 USD
Availability: InStock

new-10%

ADG787BCPZ-500RL7

Manufacturer part number:ADG787BCPZ-500RL7

Manufacturer:Hotenda

Description:19ns, 5ns SPDT 3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG787 10 Pins 50pA Typ 2.7V 10-VFDFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG787BCPZ-500RL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Resistance	3Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG787
Pin Count	10
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	5.5V
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Power Dissipation	5.5μW
Max Supply Current	1μA
Turn On Delay Time	13 ns
Number of Inputs	2
Bandwidth	145MHz
Turn-Off Delay Time	3 ns
On-State Resistance (Max)	3Ohm
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	50pA Typ
Channel Capacitance (CS(off), CD(off))	16pF
On-state Resistance Match-Nom	0.07Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	19ns, 5ns
Insertion Loss (dB)	0.2 dB
Charge Injection	14pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	30ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	6Ohm
Normal Position	NO/NC
Height	750μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG787BCPZ-500RL7 Product Details

ADG787BCPZ-500RL7 Overview

As the electronic part is packed in 10-VFDFN Exposed Pad, CSP, international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 10. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. An electrical component like this is included in the 10 series. The analog switch ics are built using SPDT switching circuits. Try searching with ADG787 to find analog multiplexer variants. A 3Ohm internal resistance characterizes this multiplexer. You can find the functions of the 10 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. 1.8V should be the lowest voltage fed to the electronic component. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. Operating voltages range from 5.5V. A 2 input needs to be operated. In 145MHz-bandwidths, data can be transferred. This electronic component presents a Drain to Source resistance of 6Ohm. This digital multiplexer has 4 outputs.