ADG772BCPZ-REEL7 Overview
Due to its 10-UFQFN, CSP packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 10. A 1 channel electronic part produces high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 10 series. A SPDT switching circuit is used for these analog switches. Using the ADG772 search parameter, you can discover variants of the switch. Analog switches have 6.7Ohm internal resistance. For details about the functions of 10 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. 2.7V should be the lowest voltage fed to the electronic component. The voltage required by this switch device is 2.7V~3.6V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 6nA. A voltage of 3.6V can be used to operate the electronic component. Operating the 2 inputs requires 2 inputs. The data can be transferred over a wide range of bandwidths, called 630MHz bandwidths. There is 8.8Ohm Drain to Source resistance on this electronic part. The analog switch ics has 4 outputs.
ADG772BCPZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 630MHz
Drain-to-Source resistance: 8.8Ohm
ADG772BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG772BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Cross Connects
- Communications systems
- Avionics
- Cellular phones
- Audio and video switching
- Microwave transmission systems
- Relay Replacement
- Precision instrumentation
- Audio/video switches
