Name: ADG726BSUZ-REEL
Brand: Hotenda
SKU: ADG726BSUZ-REEL
Price: 11.88000 USD
Availability: InStock

new

ADG726BSUZ-REEL

Manufacturer part number:ADG726BSUZ-REEL

Manufacturer:Hotenda

Description:5.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG726 48 Pins 250pA 2.5V 48-TQFP

Case Package:SOT-23

Datasheet:ADG726BSUZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	48-TQFP
Surface Mount	YES
Number of Pins	48
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	48
ECCN Code	EAR99
Resistance	5.5Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	100μW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG726
Pin Count	48
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Channels	16
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	10μA
Power Dissipation	100μW
Logic Function	Multiplexer
Number of Inputs	32
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	34MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	16 ns
On-State Resistance (Max)	5.5Ohm
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	13pF 137pF
On-state Resistance Match-Nom	0.3Ohm
Charge Injection	1pC
Crosstalk	-72dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	37ns
Signal Current-Max	0.03A
Length	7mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG726BSUZ-REEL Product Details

ADG726BSUZ-REEL Overview

Shipping overseas is convenient with the electronic component packed in 48-TQFP. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 48 terminations. Due to its 16 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. A total of 48 pins are injected into the electrical part body. It consists of 2 circuits. Try searching for the analog switch ic with ADG726 if you are looking for variants. This digital multiplexer has 5.5Ohm internal resistance. The datasheets for the 48 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analog switch ics with Dual, Single supply type are cost-effective. 1.8V is the lowest voltage the electrical component should receive. An operating current of 10μA would be sufficient for this switch device. 5V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 32 inputs. The transfer of data can be performed over 34MHz bandwidths.