Name: ADG701LBRJZ-500RL7
Brand: Hotenda
SKU: ADG701LBRJZ-500RL7
Price: 2.06000 USD
Availability: InStock

new-10%

ADG701LBRJZ-500RL7

Manufacturer part number:ADG701LBRJZ-500RL7

Manufacturer:Hotenda

Description:12ns, 8ns (Typ) SPST - NO 3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG701 5 Pins 250pA 3V SC-74A, SOT-753

Case Package:SOT-23

Datasheet:ADG701LBRJZ-500RL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Surface Mount	YES
Number of Pins	5
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Resistance	3Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG701
Output	SEPARATE OUTPUT
Pin Count	5
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	12 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	8 ns
On-State Resistance (Max)	3Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	17pF 17pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 8ns (Typ)
Charge Injection	5pC
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Voltage - Supply, Single (V+)	1.8V~5V
Normal Position	NC
Length	2.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG701LBRJZ-500RL7 Product Details

ADG701LBRJZ-500RL7 Overview

Shipping overseas is convenient due to the electrical component's packing in SC-74A, SOT-753. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 5. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A total of 5 pins are injected into the electrical part body. SPST - NO switching circuits are used in these analog switch ics. Try searching for the analog switch ic with ADG701 if you are looking for variants. As far as internal resistance is concerned, it has 3Ohm. Please refer to the datasheets for 5 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.8V. This digital switch can be operated with a current of 1nA. Analogue multiplexers require a 1.8V~5V voltage to drain from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There are 1 inputs to be operated. This switch operates within the bandwidth of 200MHz.