ADG701LBRJ-REEL Overview
Presented in SC-74A, SOT-753, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. There are 5 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. An electrical component like this is included in the 5 series. SPST - NO switching circuits are used in these analog switch ics. Try searching with ADG701 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 3Ohm. To find out what the 5 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. It is recommended that the electrical component receives a voltage of 1.8V. This analogue multiplexer requires a voltage of 1.8V~5V when it drains from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. There are 1 inputs to be operated.
ADG701LBRJ-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
ADG701LBRJ-REEL Applications
There are a lot of Analog Devices Inc. ADG701LBRJ-REEL Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- USB 1.1 signal switching circuits
- SONET/SDH ADM
- Private Branch Exchange (PBX)
- SDH/SONET multiplexers
- Multi-Line E1 Interface Cards
- Medical systems
- Industrial and process control systems
- PCMCIA cards
- Fault Tolerant Systems
