Name: ADG608TRU
Brand: Hotenda
SKU: ADG608TRU
Availability: InStock

new-10%

ADG608TRU

Manufacturer part number:ADG608TRU

Manufacturer:Hotenda

Description:75ns, 45ns 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG608 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG608TRU Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Contact Plating	Lead, Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Additional Feature	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
Subcategory	Multiplexer or Switches
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ADG608
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	6.5V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	50nA
Power Dissipation	1.5μW
Throw Configuration	DPST
Propagation Delay	75 ns
Turn On Delay Time	100 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3.3V~5V ±5V
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	6.5V
On-State Resistance (Max)	30Ohm
High Level Output Current	20mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	9pF 40pF
On-state Resistance Match-Nom	2Ohm
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	5 Ω (Max)
Crosstalk	-85dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG608TRU Product Details

ADG608TRU Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. There are 16 terminations totally. As a result of its 8 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. It is injected into the electrical part body with 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching with ADG608 if you're looking for variants. Analog switches have 30Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 6.5V to a switch device. In order for the electronic part to function properly, the lowest voltage should be 3V. It would be sufficient to run this analogue multiplexer with 50nA current. For this switch, a dual supply voltage is feasible, but it must not exceed 6.5VIt is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. 5V operating voltages can be used with this electrical part. The 8 inputs need to be operated in order to work. Additional features of the electronic component include: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.