ADG608BN Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Through Hole is this multiplexer. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. There are 1 circuits in this switch device. ADG608 can be used to search for analog multiplexer variants. This digital multiplexer has 30Ohm internal resistance. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 6.5V. For this switch, a dual supply voltage is feasible, but it must not exceed 6.5VIt is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. Don’t miss additional features of the electronic component such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG608BN Features
8 Channels
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG608BN Applications
There are a lot of Analog Devices Inc. ADG608BN Analog Switches & Multiplexers ICs applications.
- Medical systems
- RGB switches
- PCMCIA cards
- Precision data acquisition
- SDH/SONET multiplexers
- Imaging
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- DSUs
- DSLAMs
- Digital Cross-Connects
