Name: ADG601BRTZ-REEL7
Brand: Hotenda
SKU: ADG601BRTZ-REEL7
Price: 2.87000 USD
Availability: InStock

new-10%

ADG601BRTZ-REEL7

Manufacturer part number:ADG601BRTZ-REEL7

Manufacturer:Hotenda

Description:120ns, 75ns SPST - NO 2.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG601 6 Pins 250pA 5V SOT-23-6

Case Package:SOT-23

Datasheet:ADG601BRTZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Surface Mount	YES
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.95mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG601
Pin Count	6
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Nominal Supply Current	1μA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	50pF 50pF
On-state Resistance Match-Nom	0.35Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	120ns, 75ns
Charge Injection	250pC
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	2Ohm
Normal Position	NO
Length	2.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG601BRTZ-REEL7 Product Details

ADG601BRTZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 6 series. Unlike digital switches, these are based on SPST - NO switching circuits. ADG601 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 2.5Ohm. For functions related to 6 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2.7V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 2.7V. In 180MHz-bandwidths, data can be transferred. Don’t miss additional features of the electronic component such as: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY. It has a Drain to Source resistance of 2Ohm ohms.

ADG601BRTZ-REEL7 Features

1 Channels
Switch Circuit: SPST - NO
Bandwidth: 180MHz
Additional Features: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 2Ohm